Detailed Product Description

auto hid xenon light, Aoqi Electronics HID specification parameters and test items (middle slim)

The main : L85 × W72 × H22 mm

Color: black or silver

Fittings: a hanging package

HID job parameters.
Input voltage: 8.0 --- 16V DC
Maximum starting current: 6.0a
Rated working voltage: 13.5V DC
Rated current: 3.2A
Constant power output: 35 ± 1W
Startup characteristics: 1 second to reach 20% brightness, reaching 6 rated brightness, 20 seconds to reach a stable current.
Over-voltage protection: 16V operating voltage large therefore, the products to enter the protection status, protection of current ≤ 0.06A.
Short-circuit protection: When the lamp output circuit short-circuit, the products to enter the protection status, protection of current ≤ 0.06A.
Output open circuit protection: When the tube rupture occurred, the products to enter the protection status, protection of current ≤ 0.06A
Reverse Protection: When the power is negative when the anti-access, products will not work. Equal protection of current 0.00A.

HID seized items must.
Appearance: smooth surface without scratches, no deformation, damage.
No broken links, non-deformation, plug connection should be firm, and shall not be torn off and the loose.

Insulation test: to-ground insulation resistance ≥ 100MΩ

Open-circuit test: output status at the open, connected to 13.5V DC, high-voltage discharge output to stop at 1-2 seconds into the automatic protection status.

Short-circuit test: output status at a short circuit, connected to 13.5V DC, at continuous 0.5-1 seconds after entering the automatic protection status.

Current job: input 13.5V DC Cold Start current: ≤ 6.0A; stable current :3.4-3.6

Hot start test: stable job to start 5 minutes after the continuous barrier-free 5 times, and hot start current: ≤ 6.0A:

Reverse testing: When the input 13.5 V DC when reverse Product unable to enter the job status.

Low-voltage testing: When the voltage from 0 V up to 7.5 ---- 9V when, HID lights to be able to successfully lit.

Over-voltage protection: When the voltage rose to 17-18V, the products to enter the protection status.

Loss Test: lamp power should be stable at: 35 ± 1W, ballast power loss at: 6 ± 1W.

Fuguang test: lamp power should be stable at the power supply voltage of 9V to start normal work lighting.

Surface Temperature Test: The ballasts and HID lamp connected to light lamps at ambient temperature under one hour later, ballast surface temperature may not be ultra-60 .

Waterproof performance: The ballast water at 100cm Baptist underwater, water temperature for the ambient temperature, 0.5 hours after the immersion light a lamp test function.

High and low temperature performance: The ballast on the temperature: -40 - +85 environment ballast should be able to work properly.

Note: The box has four Ballast 13.5V/35W model, black and silver of the two. Are with EMC interference filter, 97% computer-controlled models can be installed.